 |
|
|
|
|
 |
|
|
Your Socket Source
|
|
|
|
|
|
|
|
|
|
|
|
CROSBY Wedge Socket
|
|
|
 |
S421T
|
Catalog number S-421T includes wedge.
Catalog number S-421TW - wedge only.
|
- Basket is cast steel.
- Individually magnetic particle inspected.
- Pin diameter and jaw opening allows wedge and socket to be used in conjuction with open swage and spelter sockets.
- New QUIC CHECKTM "Go" and "No-Go" feature cast into wedge. The proper size wire rope is determined when the following criteria are met: 1. The wire rope should pass thru the "Go" hole in the wedge. 2. The wire rope should NOT pass thru the "No-Go" hole in the wedge.
- Wedge socket termination have an efficiency rating of 80%, based on the catalog strength of XXIP (EEIP) grade wire rope.
- Wedge Sockets meet the performance requirements of Federal Specification RR-S-550D Type C, except for those provisions required of the contractor.
|
- Secures the tail or "dead end" of the wire rope to the wedge, thus eliminates loss of "Punch out" of the wedge.
- Eliminates the need for an extra piece of rope and is easily installed.
- The "TERMINATOR"TM wedge eliminates the potential breaking off of the tail due to fatigue.
- The tail which is secured by the base of the clip and the wedge is let undeformed and available for re-use.
- Utilizes standard Crosby Red U-Bolt® wire rope clip.
- Generates a minimum efficiency of 80% based on the catalog breaking strength of wire rope.
- Standard S-421 wedge sockets can be retrofitted with the new style "TERMINATOR"TM wedge.
|
|
|
|
|
|
|
|
Grooved Spelter Sockets
|
NOTICE: All cast steel sockets 1-5/8" and larger are magnetic particle inspected and ultra sonic inspected. Proof testing available on special order. |
- Forged Steel Sockets thru 1 1/2", cast alloy steel 1-5/8" thru 4".
- Spelter socket termination's have an efficiency rating of 100%, based on the catalog strength of wire rope. Ratings are based on recommended use with 6 x 7, 6 x 19, or 6 x 37, IPS or XIP (EIP), XXIP (EEIP), RRL, FC, or IWRC wire rope.
|
|
|
|
GROOVED OPEN SPELTER SOCKETS
|
Rope
Dia.
(in.) |
Structural
Strand
Dia.
(in.) |
1/4 |
-- |
5/16 - 3/8 |
-- |
7/16 - 1/2 |
-- |
9/16 - 5/8 |
1/2 |
3/4 |
9/16 - 5/8 |
7/8 |
11/16 - 3/4 |
1 |
13/16 - 7/8 |
1 1/8 |
15/16 - 1 |
1 1/4 - 1 3/8 |
1 1/16 - 1 1/8 |
1 1/2 |
1 13/16 - 1 1/4 |
1 5/8 |
1 5/16 - 1 3/8 |
1 3/4 - 1 7/8 |
1 7/16 - 1 5/8 |
2 - 2 1/8 |
1 11/16 - 1 3/4 |
2 1/4 - 2 3/8 |
1 13/16 - 1 7/8 |
2 1/2 - 2 5/8 |
1 15/16 - 2 1/8 |
2 3/4 - 2 7/8 |
2 3/16 - 2 7/16 |
3 - 3 1/8 |
2 1/2 - 2 5/8 |
3 1/4 - 3 3/8 |
2 3/4 - 2 7/8 |
3 1/2 - 3 5/8 |
3 - 3 1/8 |
3 3/4 - 4 |
-- |
|

G-416 |
Open Grooved Sockets meet the performance requirements of Federal Specification RR-S-550D, Type A, except for those provisions required of the contractor.

|
GROOVED CLOSED SPELTER SOCKETS
|
G-417
|
Closed grooved Sockets meet the performance requirements of Federal Specification RR-S-550D, Type B, except for those provisions required of the contractor. |
|
|
|
|
|
|
|
© DESERT SPECIALTY. 2011
All Rights Reserved.
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|