KWIK-LOC SYSTEM

The Rize Kwik Loc cable lock can be used as a fast and reliable way to suspend flourescent lighting, HIDs, sound systems, cable trays, fan units or seismic bracing. Cable locks are to be used on static load applications only.

Features/Benefits

  • Cable locks provide a fast,strong and lightweight solution to the task of hanging electrical and mechanical services.
  • Its time saving qualities have been shown to increase productivity by up to six times compared to traditional hanging methods.
  • Installation requires no specialized training.
  • Cable locks are made of durable metal alloys and stainless steel and combine these qualities with the strength of high tensile wire rope.
  • It allows the installer to position the hangers vertically or at an angle to the suspended object.
  • The Kwik Loc system is lightweight.It is easy to carry and reduces the risk of injury due to the accidental drop of materials during aerial installations.

Zinc Housing

One piece die cast Zinc type Zamac 5 combines major anti-corrosion properties with strength and consistent manufacturing quality.

Locking Wedges

An oil impregnated sintered steel locking wedge is seated in each of two channels. Both wedges incorporate a release pin for easy adjustment. Each wedge makes contact with the wire rope using serrated teeth. These teeth press onto the wire rope and spread the load across the length of the wedge, maximizing grip strength.

Stainless Steel Springs

Each spring is manufactured of type 302 S26 stainless steel.






KL200 KWIK-LOC:

The KL200 can be used for suspending heavy loads such as fan coil units and HID lights. The KL200 works with 1/8th and 3/16th inch cable.
The KL200 can also be used for end post assemblies and H brace assemblies for 8-10 gauge wire.


KL150 KWIK-LOC:

The KL150 is used for hanging duct, cable tray and cable basket, Sound systems, lighting rafts and luminaries, CCTV cameras and secondary supports. You can use 3/32nd and 1/8th inch cable.
The KL150 is also installed on stock fence for use with 12-10 gauge wire, it can also be used for cordon and drip wires.


KL100 KWIK-LOC:

The KL100 was introduced to be used on 1/16th and 3/32nd inch cable. Typical applications include, fluorescent lights, luminaries, lighting rafts, spiral duct, cable tray.
The KL100 may also be used on 16-14 gauge wire for use on electric fence and plain wire for fruiting or canopy wires.

Model Plain Wire Barbed Wire Working Load
USA Metric USA Metric USA Metric
KL100 12 - 17 ga. 1.5 - 2.3 mm - - 600 lbs 275 kg
KL150 10 - 12 ga. 2.5 - 3.5 mm 15 ga 2 x 1.5 mm 800 lbs 360 kg
KL200 - - 12.5 ga 2 x 2.5 mm 600 lbs 275 kg
KL200 8 - 11 ga. 3 - 4 mm - - 1400 lbs 640 kg
Kwik Loc Size Cable Diameter Working Load Minimum Breaking Load
KL200 3/16 inch 50-640 lbs 3200 lbs
KL200 1/8 inch 25-250 lbs 1250 lbs
KL100 3/32 inch 25-150 lbs 800 lbs
KL100 1/16 inch 0-75 lbs 400 lbs

© DESERT SPECIALTY. 2011
All Rights Reserved
.